Toshiba Portege 2000 Maintenance Manual page 188

4 Replacement Procedures
4.11.3 LED SW membrane
Removing the LED SW membrane
The following describes the procedure for removing the LED SW membrane. (See Figure
4-26)
1. Lift the insulation sheet and remove the following screws fixing the LED SW
membrane and the LED lens.
• M2×3S
• M2×4Z
M2×3S S-THIN HEAD
Installing the LED SW membrane
The following describes the procedure for installing the LED SW membrane. (See Figure
4-26)
1. Lift the insulation sheet and Install the LED SW membrane and the LED lens with
the following screws.
• M2×3S
• M2×4Z
4-36
4.11 Touch pad/ MODEM Jack/LED SW membrane
S-THIN HEAD screw
S-THIN HEAD screw
Figure 4-26 Removing the LED SW membrane
S-THIN HEAD screw
S-THIN HEAD screw
x3
x1
M2×4Z S-THIN HEAD
LED SW membrane
LED lens
x3
x1
Portage 2000 Maintenance Manual (960-333)