Toshiba Portege 2000 Maintenance Manual page 182

4 Replacement Procedures
4.9.2 FAN
Removing the FAN
The following describes the procedure for removing the FAN. (See Figure 4-20)
1. Remove the FAN cable from the connector PJ780 on the main board.
2. Remove the following screws fixing the FAN.
• M2×4Z
Installing the FAN
The following describes the procedure for installing the FAN. (See Figure 4-20)
1. Install the FAN and secure it with the following screws
• M2×4Z
2. Install the FAN cable to the connector PJ780 on the main board.
4-30
BIND screw x3
Figure 4-20 Removing the FAN
BIND screw x3
4.9 Main board/ FAN
M2×4Z BIND
PJ780
Portage 2000 Maintenance Manual (960-333)