Blocking A Cue; Creating A Move In Black Cue - Jands Vista T4 User Manual

Creating a Move in Black cue
3 . Click on the 'Untrack'
(cue only)' o ption from the Tools menu. Vista inserts events in the following
cue to set the lights ba
were no events of t
Blocking a cue
Vista is a tracking console,
in any cue and that any inf
a new event or cleared. Som
that are subsequently made to previous cues will not affect the final look of the
c hosen cue.
To do this:
1 . Select the cue w ith the
select the cue by clicking on the cue t
it.
Choose the 'Bl ock' but
2 .
'Block cue ' option from
select Block from the popup menu. Vista duplicates
into the selected cue.
Creating a Move in Black cue
Sometimes you will want fixtures to move to a position, change to a colour, add a
gobo or get set up in some other way while their intensities are at zero. You
could do this by programming the necessary events, but you can also do it
quickly using the 'Mark Cue' option on the Tools menu.
When you create a Mark cue your original programming is preserved and will be
restored if you delete the Move in Black (MIB) later.
To Mark a cue and add 'Move in
Select the cue you want to work with.
1.
6‐18
button on the t oolbar or select the 'Un-track events
ck to the state they were in before the change. If th
hat ty pe originally, Vista inserts release events instea
which means that only changed information is stored
ormation in a cue tracks forward until it is replaced b
etimes it's useful to 'block' a cue so that any change
events you want to keep exactly as they are. You can
ile or playing the cuelist until you reach
ton on the toolbar (normally Ctrl F9) or select the
the Cuelist menu
Black' events:
Working with cuelists
or right-click on the cue tile and
all tracked information
Vista User Guide, Version 2
ere
d.
y
s