3. Reinstall the body cover.
4. Reinstall the rear I/O cover.
5. Reinstall the bottom cover.
6. If the computer is shipped with the projector, reinstall the top cover.
7. If a locking device is available, use it to lock the computer.
8. Reconnect the external cables and power cords to the corresponding connectors on the computer.
9. Depending on the parts you installed or replaced, you might need to confirm the updated information.
See Chapter 4 "Using the Setup Utility program" on page 11.
10. If a newly installed hardware component does not work normally, update the device driver.
48
ideacentre 610S Hardware Maintenance Manual