Completing The Parts Replacement - Lenovo ideacentre 610S Hardware Maintenance Manual

Hide thumbs Also See for ideacentre 610S:
Table of Contents

Advertisement

5. Remove the discrete graphics card. See "Replacing the discrete graphics card" on page 28.
6. Remove the power button board. See "Replacing the power button board" on page 30.
7. Remove the wireless card. See "Replacing the wireless card" on page 30.
8. Remove the system board shield and the storage drive board shield. See "Replacing the system board
shield and the storage drive board shield" on page 31.
9. Remove the system board. See "Replacing the system board" on page 40.
10. Remove the heat sinks. See "Replacing the heat sinks" on page 44.
11. Remove the bottom fan as shown.
Figure 33. Removing the bottom fan
12. Install the new bottom fan.
13. Reinstall the heat sinks.
14. Reinstall the system board.
15. Reinstall the storage drive board shield and the system board shield. See "Replacing the system board
shield and the storage drive board shield" on page 31.
16. Reinstall the wireless card. See "Replacing the wireless card" on page 30.
17. Reinstall the power button board. See "Replacing the power button board" on page 30.
18. Reinstall the discrete graphics card. See "Replacing the discrete graphics card" on page 28.
19. Reinstall the I/O board. See "Replacing the I/O board" on page 27.
20. Reinstall the I/O board shield. See "Replacing the I/O board shield" on page 26.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 47.

Completing the parts replacement

To reinstall the computer covers and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are
left inside your computer. See Chapter 6 "Hardware locations" on page 17 for the locations of various
components in your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
.
Chapter 7
Installing or replacing hardware
47

Advertisement

Table of Contents
loading

Table of Contents