Getting Started; Update Your Device - Superchips 3570 Flashcal Jeep Wrangler Manual

Step 1 - Update Your Device
NOTE: You will need to be connected to the internet and running Windows XP or later.
Download the Spark update software
1. Go to www.superchips.com and move your mouse icon over the
CUSTOMER SUPPORT tab towards the top of the page. In the drop down menu click Down-
load Product Update Software.
2. Click the DOWNLOAD button located below the
3. Click the Run button on the pop-up menu.
4. Read and Accept the License Agreement terms. Click the Install Button, then the Finish button
once the download is complete.
(NOTE: The first time using Spark, you will be required to fill out a registration form).
Updating your programmer
5. Double click the Spark Icon located on your computer's desktop. You will be asked to
"Connect Device".
6. Connect your device to the computer using the supplied USB cable. Spark will automatically
search for updates related to your device. If an update is found and available, click the Update
button to proceed. CAUTION: Do not unplug the device while it is being updated.
Once the update is complete, you will be informed that it is safe to disconnect your device.
(NOTE: At the end of the update, you will be directed to the online store and given the option to
upgrade your device from a Flashcal to a Flashpaq. After purchasing and downloading this option, you
will have the ability to use your device as a Flashpaq product. This allows you to program your vehicle
with the latest tunes available from Superchips. For more information go to www.superchips.com)
4
Step 1 - Update Your Device
NOTE: You will need to be connected to the internet and running Windows XP or later.
Download the Spark update software
1. Go to www.superchips.com and move your mouse icon over the
CUSTOMER SUPPORT tab towards the top of the page. In the drop down menu click Down-
load Product Update Software.
2. Click the DOWNLOAD button located below the
3. Click the Run button on the pop-up menu.
4. Read and Accept the License Agreement terms. Click the Install Button, then the Finish button
once the download is complete.
(NOTE: The first time using Spark, you will be required to fill out a registration form).
Updating your programmer
5. Double click the Spark Icon located on your computer's desktop. You will be asked to
"Connect Device".
6. Connect your device to the computer using the supplied USB cable. Spark will automatically
search for updates related to your device. If an update is found and available, click the Update
button to proceed. CAUTION: Do not unplug the device while it is being updated.
7. Once the update is complete, you will be informed that it is safe to disconnect your device.
(NOTE: At the end of the update, you will be directed to the online store and given the option to
upgrade your device from a Flashcal to a Flashpaq. After purchasing and downloading this option, you
will have the ability to use your device as a Flashpaq product. This allows you to program your vehicle
with the latest tunes available from Superchips. For more information go to www.superchips.com)
4

Getting Started

logo.
Getting Started
logo.