Chapter 1 - Thor Vm3 Agency Information; Fcc Part 15 Statement; Fcc 5Ghz Statement; Emc Directive Requirements - Honeywell Thor VM3 User Manual

1
Thor VM3 Agency Information
Thor VM3 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation.
However as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency
guidelines that follow. Read these guidelines before using your Thor VM3.
This documentation is relevant for the following Thor models: VM3.

FCC Part 15 Statement

This device complies with FCC Rules, part 15 [and with RSS-210 of Industry Canada]. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to cor-
rect the interference at his own expense.
Caution - Changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC authoriza-
tion to operate this equipment.

FCC 5GHz Statement

For the band 5600-5650 MHz, no operation is permitted.
High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands.
These radar stations can cause interference with and/or damage to this device.

EMC Directive Requirements

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.

Canada, Industry Canada (IC) Notices

This Class A digital apparatus complies with Canadian RSS-GEN issue 3:2010 and RSS-210 issue 8:2010.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Honeywell Thor VM3 is below the Industry Canada (IC) radio frequency exposure limits. The
Honeywell Thor VM3 should be used in such a manner such that the potential for human contact during normal operation is
minimized.
This device has been certified for use in Canada. Status of the listing in the Industry Canada's REL (Radio Equipment List) can
be found at the following web address: Additional Canadian information on RF exposure also can be found at the following web
address: Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe A est conforme aux normes canadiennes RSS-GEN numéro 3:2010 et RSS-210 numéro
8:2010.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet
appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
1 - 1