Connecting To Terminal Emulation; Rebooting The Thor Vm3 - Honeywell Thor VM3 Quick Start Manual

Connecting to Terminal Emulation

The Thor VM3 supports terminal emulators such as RFTerm® and
Enterprise TE.
Before you make a host connection, you will, at a minimum, need to
know:
• the alias name or IP address (Host Address) and
• the port number (Telnet Port) of the host system to properly set
up your host session.
1. Make sure the mobile client network settings are properly con-
figured. If you are connecting via WLAN (802.11x), make sure
your Thor VM3 is connected to the network.
2. Launch the terminal emulation program.
For more details refer to the RFTerm User's Guide or the Enterprise
TE User Guide, available at www.honeywellaidc.com.

Rebooting the Thor VM3

To reboot the Thor VM3 with Windows Embedded Compact 7:
1. Select Start > Settings > Control Panel > Registry.
2. Tap the Restart button.
To reboot the Thor VM3 with all other Windows operating systems:
1. Select Start > Shutdown > Restart to reboot.
When the Thor VM3 is booting, there may be small delays while the
wireless client connects, applications launch, remote management
completes and Bluetooth devices connect.