Spark Plug; Cooling System - Echo PAS-225 Operator's Manual

MAINTENANCE
1. Use a clean rag to remove
loose dirt from around fuel cap
and empty fuel tank.
2. Pull the fuel filter from the fuel
tank.
3. Remove the filter from the line
and install the new filter.
Federal EPA regulations require all
model year 2012 and later gasoline
powered engines produced for sale
in the United States to be equipped
with a special low permeation fuel
supply hose between the carburetor and fuel tank. When servicing model
year 2012 and later equipment, only fuel supply hoses certified by EPA can
be used to replace the original equipment supply hose. Fines up to $37,500
may be enforced for using an un-certified replacement part.

Spark Plug

Level 2.
Parts Required:
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise
severe engine damage may occur.
1. Remove spark plug and check
for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a
new one. DO NOT sand blast to
clean. Remaining sand will
damage engine.
3. Adjust spark plug gap by bend-
ing outer electrode.
4. Tighten spark plug to 150-170 kgf•cm (130-150 in•lbf).

Cooling System

Level 2.
Parts Required:
34
Tune up Kit
None.
PAS-225 VP
0.65 mm (0.026 in.)
© 5/2017 ECHO Inc.
X7732274200