Troubleshooting - DeLonghi Magnifica S ECAM 22.110.B Instruction Manual

Table of Contents

Advertisement

20. TROUBLESHOOTING

Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
The coffee is not hot.
The coffee is weak or not
creamy enough.
The coffee is delivered too
slowly or a drop at a time.
Coffee does not come out of
one or both of the spouts.
The coffee beans have run out.
The pre-ground coffee funnel (A6)
is clogged.
FLASHING
The infuser has not been replaced
after cleaning (A11).
FLASHING
The inside of the appliance is very
dirty.
POSSIBLE CAUSE
The cups were not preheated.
The infuser has cooled down because 2/3
minutes have elapsed since the last coffee was
made.
The coffee is ground too coarsely.
The coffee is unsuitable.
The coffee is ground too finely.
The spouts are blocked.
Fill beans container.
Empty the funnel with the help of a brush as
described in the section "14.8. Cleaning the
pre-ground coffee funnel".
Insert the infuser as described in the section
"14.9. Cleaning the infuser".
Clean the inside of the appliance thoroughly,
as described in the section "14. Cleaning". If
the message is still displayed after cleaning,
contact a service centre.
REMEDY
Warm the cups by rinsing them with hot water.
Please note: the hot water or rinse function can
be used.
Before making coffee, heat up the infuser by
pressing the
Turn the grinding dial one click anticlockwise
while the grinder is in operation (fig. 8). Con-
tinue one click at a time until coffee delivery is
satisfactory. The effect is only visible after de-
livering 2 coffees (see section "11.3Adjusting
the coffee mill").
Use pre-ground coffee for espresso machines.
Turn the grinding dial one click clockwise
while the grinder is in operation (fig. 8). Con-
tinue one click at a time until coffee delivery is
satisfactory. The effect is only visible after de-
livering 2 coffees (see section "11.3. Adjusting
the coffee mill").
Clean the spouts with a toothpick.
19
rinse button.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Magnifica S ECAM 22.110.B and is the answer not in the manual?

Questions and answers

Peter Kemp
January 24, 2025

how to set up for hotter coffee

1 comments:
Mr. Anderson
February 10, 2025

To set up the DeLonghi Magnifica S ECAM 22.110.B for hotter coffee, follow these steps:

1. Adjust the Temperature Setting:
- Ensure the machine is off and the main switch is in the "I" position.
- Follow the instructions in the manual to modify the temperature setting.

2. Preheat the Cups:
- Use hot water to warm the cups before brewing coffee.

3. Adjust the Coffee Mill:
- Make sure the grinder is set optimally, as finer grounds can help extract hotter coffee.

4. Ensure Proper Maintenance:
- Regularly clean and descale the machine to maintain efficiency and consistent temperature.

These adjustments should help achieve a hotter cup of coffee.

This answer is automatically generated

Vladimir Rybák
February 27, 2025

Please recommend me a vaseline for lubricating the brewing unit, including the sealing rings. Thank you.

Christopher Georgiadis
February 28, 2025

When I descale my DeLonghi -Magnifica-S-Ecam-22-110-C. Water comes out of the Steamer and NO water out of the Coffee spouts WHY.

1 comments:
Mr. Anderson
February 28, 2025

During the descaling process of the DeLonghi Magnifica S ECAM 22.110.B, water comes out from the cappuccino maker (A18) instead of the coffee spouts (A12). This is normal as the rinsing phase directs water through the cappuccino maker. If no water is coming out at all, possible reasons could include an incomplete descaling cycle, a clogged system, or an issue with water flow. Ensuring the descaling cycle is completed correctly and checking for blockages may resolve the issue.

This answer is automatically generated

Les Baines
March 7, 2025

ground coffee and long coffee beans is not working

1 comments:
Mr. Anderson
March 7, 2025

The ground coffee may not be working because the "pre-ground coffee" function is selected without placing pre-ground coffee in the funnel. The long coffee beans may not be working because the beans have run out, or the pre-ground coffee funnel is clogged. To resolve these issues, ensure coffee is placed in the funnel when using the pre-ground function, refill the beans container if empty, and clean the pre-ground coffee funnel if it is clogged.

This answer is automatically generated

Linda Thatcher
March 9, 2025

Where would I buy the replacement tube for the milk attachment?

Table of Contents

Save PDF