Unlocking The Console; Assign Externals; Software Version - Philips 64331 Operation Manual

Unlocking the Console

To unlock the console:
1) Press MENU or RECORD . The LCD display will appear as shown in Figure 82.
2) Use SOFTKEY A "Unlock Memory" . You will be prompted to enter your password
Password" on page 67
3) Once you have successfully entered your password the console will be unlocked.

14. Assign Externals

There are two keys EXT 1 and EXT 2 that can have remote DMX512 devices like smoke/fog/haze machines, strobes,
etc., assigned to them. This is done as part of the normal patch process.
This function allows you to set the keys as Momentary or Latch .
• Momentary will output the DMX as long as the key is pressed.
• Latch will turn the device on and leave it on until the key is pressed again.
This function is on the fourth page of the menu screens.
To access Assign Externals:
1) Press MENU.
2) Press SOFTKEY D "Next" four times.
3) Press SOFTKEY A "Assign EXT".
Assign External Options:
• You can now use SOFTKEY A to toggle EXT 1 between Momentary and Latch.
• You can now use SOFTKEY B to toggle EXT 2 between Momentary and Latch.

15. Software Version

This will show you which version of software the console is currently running.
To determine what version software the console is using:
1) Press MENU .
2) Press SOFTKEY D "Next" four times.
3) The software version will be shown next to SOFTKEY B .
Memory Lock
Menu
Release
Memory Locked
DMX Base
FX
GM xxx
Figure 82: Memory Unlock - LCD Display
for more information).
200 Plus Series Console
Unlock
A
Memory
B
C
D
Exit
Assign Externals
(See "Change
69