Reset Procedures - Yaesu FT-65R/E Operating Manual

r p
eset rOCedures
In the event of erratic operation of the transceiver, it is possible that data on the
microprocessor may have become corrupted. While this is a highly unusual sit-
uation, the only path to recovery may involve resetting of the microprocessor.
Here's how to do this:
1. Turn the radio off.
2. Press and hold [MONI] and [PTT] switch and turn the radio on simultane-
ously.
3. Press [▲] [▼] key to select one choice from the reset menu:
Display
F1 SET RESET
F2 MEM RESET
F3 BANK RESET
F4 ALL RESET
F5 MEM-ONLY
F6 VHF-ONLY
F7 UHF-ONLY
F8 FM-ONLY
F9 CLONE
4. Press the F/W key momentarily to complete the reset procedure.
24
Reset the Set Mode settings to factory defaults.
Clear the Memory settings to factory defaults.
Clear the Memory Bank assignments.
Clear the All memories and other settings to factory defaults.
Operation on the Memory only.
Operation on the VHF Band only.
Operation on the UHF Band only.
Operation on the FM-RADIO only.
Clone mode.
FCC ID: K6620665X20 / IC: 511B-20665X20
Operation
FT-65R/E Operating Manual
Application for FCC / IC