Display - Pioneer 516-S/-K Operating Instructions Manual

Controls and displays

Display

Illustration shows the VSX-516 model
1
14
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB (VSX-516 model only)
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
2
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
multichannel signal.
2 3 4 5 6
15 16 17
7 8 9 10 11 12
EON
RDS
SP
18 19 20 21 22
3 2 DIGITAL
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
4 2 PRO LOGIC II x (VSX-516 model) /
2 PRO LOGIC II (VSX-416 model)
When the (STANDARD) Pro Logic II mode
of the receiver is on, 2 PRO LOGIC II
lights to indicate Pro Logic II decoding. 2
PRO LOGIC II x lights to indicate Pro Logic
IIx decoding (see Listening in surround
sound on page 25 for more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 28).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see Auto playback on page 25).
8 ATT
Lights when ANALOG ATT is used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the receiver is in sleep mode.
13
[ ]
L 6
[ ]
C
[ ]
A R
[ ]
Rs
0
[ R ]
SB
[ ]
L
SB
[ Ls ]
6
40 125 250 4K13K
23
05
21
En