Tone Scanning; Scanning For Ctcss And Dcs Tones/Codes - BTECH GMRS-V1 Manual

38 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
3. Press the
4. Use the and
scanning list. The change will apply to the current channel selected
5. Press the
6. Press the
Channels that are in the scanning be indicated on the LCD display. Under the Memory Channel
number a small icon box will appear if it is in the scanning list. No icon under the memory
channel will be present if the channel is skipped during scanning.
Tone Scanning
Scanning for CTCSS and DCS Tones/Codes
Scanning for a CTCSS tone or DCS code can be done while Frequency Mode (VFO) or
Channel Mode (MR) is selected. Only when VFO mode is selected, can the detected
tone/code be saved to menu 11/10.
CTCSS tone and DCS code scanning mode can be accessed with or without a signal being
present. The scanning process itself only occurs while a signal is being received.
Not all repeaters requiring a CTCSS tone or DCS code for access will transmit one back. In
key to select.
keys to select if the channel will be added or removed from the
key to confirm and save.
key to exit the menu.
GMRS-V1