Siemens SITRANS LG250 Operating Instructions Manual page 50

Additional settings - Scal-
ing interface
Additional settings - Scal-
ing interface (1)
Additional settings - Scal-
ing interface (2)
Additional settings - Cur-
rent output, size
Additional settings - Cur-
rent output, adjustment
50
Since scaling is very extensive, scaling of the interface value was
divided into two menu items.
In menu item "Interface 1" you define the scaling size and the scaling
unit for the interface value on the display, e.g. volume in l.
You can accept the scaling of the level measurement also for the
interface measurement. If you select "Yes", the current setting is
displayed.
If you have selected "No", you can enter the scaling for the interface
separately.
In menu item "Interface (2)" you define the scaling format on the
display and the scaling of the interface measured value for 0 % and
100 %.
In menu item "Current output, variable" you specify which measured
variable the current output refers to.
In menu item "Current output, adjustment" you can assign a respec-
tive measured value to the current output.
SITRANS LG250 - Operating Instructions PBD-51041387