Siemens SITRANS LG250 Operating Instructions Manual page 12

External display and ad-
justment unit with HART
protocol
DISADAPT
Flanges
Electronics module
12
You can find additional information in the operating instructions
manual "LG Remote Interface".
The LG Remote Interface is suitable for measured value indication
and adjustment of sensors with HART protocol. It is looped into the
4 ... 20 mA/HART signal cable.
You can find additional information in the operating instructions
manual "LG Remote Interface".
The adapter "DISADAPT" is an accessory part for sensors with dou-
ble chamber housings. It enables the connection of the external dis-
play and adjustment unit to the sensor housing via an M12 x 1 plug.
You can find further information in the supplementary instructions
"Adapter DISADAPT".
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, ASME B 16.5, JIS B 2210-
1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
47574).
The electronics module SITRANS series LG is a replacement part for
TDR sensors of SITRANS series LG. There is a different version avail-
able for each type of signal output.
You can find further information in the operating instructions manual
"Electronics module SITRANS series LG".
SITRANS LG250 - Operating Instructions PBD-51041387