Lenovo ThinkStation P510 Hardware Maintenance Manual page 126

a. Remove the dummy bezel and install the bezel in the front Thunderbolt adapter kit to the flex
module first.
Figure 47. Installing the bezel to the flex module
b. To install a new front Thunderbolt I/O adapter into the retaining bracket, align the four holes in the
front Thunderbolt I/O adapter with the corresponding mounting studs on the bracket. Then, press
the card downward until it snaps into position.
Figure 48. Installing the front Thunderbolt I/O adapter into the retaining bracket
120
ThinkStation P510 and P710 Hardware Maintenance Manual