Lenovo ThinkStation P510 Hardware Maintenance Manual page 110

5. Press the tabs 1 toward each other as shown, and slide the new optical drive halfway into the bay
from the front of the computer. Then, release the tabs and continue to slide the optical drive in until
it snaps into position.
Figure 17. Installing the optical drive
6. Connect the signal cable and the power cable to the new optical drive.
Note: If you are replacing a flex module or a flex bay storage enclosure, connect additional cables
between the bay and the system board or adapter cards.
Figure 18. Connecting cables to the optical drive
7. Reinstall the direct cooling air baffle. See "Direct cooling air baffle" on page 101.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 189.
104
ThinkStation P510 and P710 Hardware Maintenance Manual