USER MANUAL Preface Thank you for purchasing the TK103 GPS vehicle tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
◆Quick Using 1) Inset GSM card, connect GPS GSM antennas and external power supply. 2) Put GPS antenna outside, around 30s blue light will keep stable on and with red light flash at 2 seconds, means device can start normal working. 3)...
1 Summary functions Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS. 1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status.
6. Set up 1. Initialization Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default password: 123456) 2. Add authorized number “admin123456 Send SMS 13612345678”. "admin" as instruction, "123456" as password, "13612345678" as authorized number.
5. Resume the initial password If you forget your password, you can resume the initial password 123456. “resumepassword” Send to the tracker, the tracker will resume the initial password. If there is no authorized numbers, all numbers can resume initial password. If there is already authorized numbers, only the authorized numbers can resume initial password.
“speed+password+space+080” Set up: Send SMS to the unit (support the speed is 80km/h). For example, send SMS “speed123456 080”. "speed" as instruction, "80" as limit speed, “123456”as password. Cancel: Send SMS “nospeed+password” to deactivate the overspeed alert. 12. Geo-fence 1) Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
17. Set country time zone In the default, tracker reply position SMS time is UTC time. After you can set zone time, tracker will reply the “zone + password + space + time zone value”. For example, “zone123456 time of your country. The format is 8”...
24. Set Web In order to see your website in each replying Geo SMS, for example your website is www.webs***.com, then “home123456 www.webs***.com”.Then it will reply “set home ok”, when you want to cancel it, just send send “nohome123456”, it will reply SMS ”cancel home ok”. 7 Command list Function Reply...
Need help?
Do you have a question about the tk103 and is the answer not in the manual?
Questions and answers