Software Update Of The Wireless Module - B. Braun Perfusor Space Instructions For Use Manual

Chapter 6
pumps. The data transfer within the BCC protocol is secured by
checksums. To ensure the correctness of the data at the third
party system it is strongly recommanded to use this checksums
to identify possible transmission failures.
Drug Library upload via Space OnlineSuite:
Please refer the instruction for use the B.Braun Space OnlineSuite
to get more information about the drug library and the upload of
drug libraries via a network.
6.4
The wireless module can be updated with new software by using the
wireless network only. Login to SpaceOnline/Configuration of the
wireless module and select "Maintenance and software update".
6.4.1 General update
Battery Pack SP with WiFi – Software Update Instructions.
The wireless module can be updated with new software versions
by using the wireless network only. The following steps describe
how to update the Battery Pack SP with WiFi.
1.
2.
OPERATION OF A PUMP WITH WIFI

Software update of the wireless module

Turn the WiFi pump on. Is the pump connected to a WiFi? If
yes, please continue on to step 3.
Connect AdHoc to the PC
a. The PC must receive a static IP address in the range of
192.168.101.x (example: x= 10).
b. The module's SSID can be found via the pump: Select the
"Status Menu" and choose the menu point 'WLAN
Status'. The next menu shows the SSID.
c. With the PC, create an AdHoc connection using the SSID
given. Do not use any network key. The module is open in
delivery status.
15