Cisco TelePresence SX10
Introduction
xConfiguration NetworkServices SNMP SystemLocation
Define the name of the Network Services SNMP System Location.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration NetworkServices SNMP SystemLocation: "SystemLocation"
where
SystemLocation
: String (0, 50)
The name of the SNMP system location.
xConfiguration NetworkServices SSH Mode
SSH (or Secure Shell) protocol can provide secure encrypted communication between the
codec and your local computer.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices SSH Mode:
where
Mode
: Off/On
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xConfiguration
Mode
xCommand
xConfiguration NetworkServices Telnet Mode
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices Telnet Mode:
where
Mode
: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
xConfiguration NetworkServices WelcomeText
Choose which information the user should see when logging on to the codec through Telnet/
SSH.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices WelcomeText:
where
WelcomeText
: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
71
API Reference Guide
xStatus
Appendices
Mode
WelcomeText
Copyright © 2016 Cisco Systems, Inc. All rights reserved.