Cisco TelePresence SX10
Introduction
xCommand Camera Preset List
List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset List CameraId:
DefaultPosition]
where
CameraId: Integer (1..1)
Only list presets for the specified camera.
DefaultPosition: False/True
List default positions only, or only those that are not default positions.
xCommand Camera Preset Remove
Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Remove PresetId:
where
PresetId: Integer (1..35)
The ID of the camera preset you want to remove.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
CameraId
[DefaultPosition:
PresetId
xCommand
xCommand
xCommand Camera Preset Show
Shows the preset details for the requested PresetId.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Show PresetId:
where
PresetId: Integer (1..35)
The ID of the camera preset you wish to see.
108
API Reference Guide
xStatus
Appendices
PresetId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.