Siemens HiPath 1100 Service Manual page 279

Collect Call Barring by extension (193)
When this blocking is activated, the system automatically rejects all incoming collect calls over
a digital line; calls received over an analog line are rejected only at the moment they are
answered.
If a call has been answered at least once by the system, Collect Call Barring cancels
the blocking.
When an incoming call over a digital line is forwarded for not being answered (*14)
and Collect Call Barring is activated, the call will ring at the first DID for the external
line.
To enable Blocking on digital lines, please inquire your local carrier.
Type of Equipment Connected to an Extension (003)
This setting specifies the type of equipment that is connected to a selected extension slot.
Auto-Answering Mode (034)
This setting specifies the use of the Auto-Answering Mode for the telephone by using a feature
code (see Functions used for Making Calls - Speakerphone Auto-Answering Mode in the User
Manual).
Billing alert for analog extension (041)
This setting allows you to transmit billing pulses to an analog extension.
Please refer to the documentation provided with the telephone set connected to the
extension to find out if a billing indication is supported and which transmission mode
is used.
Timer for outgoing external calls (047)
This setting specifies a maximum time for the duration of an outgoing external call for each
extension.
The time count starts upon connection of a call and will never restart while the call is in progress
(e.g., when there is a transfer). Once the time expires, the call is terminated.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-41