Settings - Passwords; General; Passwords - Fronius Datamanager 2.0 Operating Instructions Manual

Settings – Passwords

General

Access to Fronius Datamanager 2.0 is regulated by assigning passwords.
Three different password types are available:
-
-
-

Passwords

(1)
(2)
(3)
66
the administrator password
the service password
the user password
(3)
Administrator password, user name = admin
The administrator password set during commissioning assigns the user read and
write (configuration) access to Fronius Datamanager 2.0. The user can then open
the "Settings" menu item and define any settings as desired, with the exception of
the UC Editor and Counter.
When an administrator password is set, the user must enter the user name and
password in Fronius Datamanager 2.0 to open the "Settings" menu item.
Service password, user name = service
The service password is usually assigned in the Commissioning Wizard by the ser-
vice technician or system installer and provides access to system-specific param-
eters. The service password is required to define counter settings and settings in
the UC Editor. If no service password has been assigned, the Counter and UC Ed-
itor menu items cannot be accessed.
After activating the selection field, the user password is displayed, user name = us-
er.
(1)
(2)
(4)
(4)