Remote Control Button Functions - Bosch PLENA PLN-6AIO240 Installation And Operating Manual

Plena All-in-One System
8.2.6

Remote control button functions

The following illustration shows the layout of the remote control function buttons.
Figure 8.5: Remote control functions
All remote control button functions are the same as described for the music player, except for
the following buttons that are only available on the remote control. See Music player, page 34.
Button
0 - 9 + Enter
CLR
Search
Table 8.4: Remote control button functions
Bosch Security Systems B.V.
Function
Select a specific song
number or radio
frequency
Clear selection
Search and store radio
stations
Installation and Operating Manual
Instructions
In USB/SD playback mode:
Use the numeric buttons to enter the number of
the song to be played. The first two digits select
the folder; the next three digits select the song.
Then press Enter to start playback.
In Tuner mode:
Use the numeric buttons to enter the frequency
of the radio station, then press Enter to tune to
that frequency. If the frequency is invalid, the
tuner returns to its previous state.
Press CLR to cancel the process of selecting a
specific song number or radio frequency and
return to the previous state.
In tuner mode: press Search for more than 5
seconds, then the tuner starts searching for
radio stations and stores the first ten stations in
M1-M10. Pressing any key interrupts the search
process.
Operation | en 37
2014.09 | V1.2 |