Plena All-in-One System
8.2.1
USB/SD/TUNER display
Figure 8.4: SD/USB/TUNER LCD display (1)
(A) MP3 indicator
(B) Repeat 1 song or Repeat All indicator
(C) Repeat folder indicator
(D) Randomize indicator
(E) +5 preset indicator
(F) CH (channel) indicator
(G) Play or Pause status
(H) Radio band indicator
(I) Radio FM stereo indicator
(J) Frequency, or song number or folder number
(K) Duration time of song or preset status
8.2.2
USB connector
Only use a USB memory stick or flash drive with a maximum current consumption of 500 mA.
Do not connect USB hard disks. Maximum supported memory size is 32 GB.
To use the USB connector (2):
1.
2.
3.
4.
8.2.3
IR remote control sensor
The IR sensor (3) receives an IR signal from the remote control supplied with the unit. The
maximum distance in an open field is 10 m, and a direct line of sight is needed.
Bosch Security Systems B.V.
A
B
M3
REPEAT
FM ST
CD
AM
G
H
I
Plug‑in the USB flash drive to the USB connector.
Press Standby to power on the music source and/or press USB/SD to select the USB
device.
While the music player is reading the content of the USB device, the LCD displays 'USB'
flashing.
–
If the content reading is successful, the first track found will be played.
–
If the content reading is unsuccessful, the LCD displays 'none'.
When playing from the USB flash drive has finished, the player will resume playback from
the tuner automatically.
Installation and Operating Manual
C
1
ALL
FOLDER
J
Operation | en
D
E
RANDOM
+ 5
CH
K
33
F
2014.09 | V1.2 |