Adjust Saddle Height - ISLABIKES Beinn Owner's Manual

Hide thumbs Also See for Beinn:
Table of Contents

Advertisement

User guidelines
Your Beinn has been designed to be ridden on paved,
unpaved, gravel roads and off -road trails with moderate
gradients. Contact with irregular terrain and loss of tire
contact with the ground may occur. Drops are intended to be
limited to less than 30cm (12in). The maximum safe combined
rider and luggage weight limits are as follows:
• Beinn 20 Small
= 66 lbs
• Beinn 20 Large
= 77 lbs
• Beinn 24
= 88 lbs
• Beinn 26 Small
= 99 lbs
• Beinn 26 Large
= 123 lbs
It is not possible to make a bike that is never going to be
damaged in an accident. If your child uses their bike beyond
its limitations, there is a high risk of failure which could result
in serious injury or death. Bikes that are used competitively
should be subject to more frequent and rigorous checks. Take
particular care to check the frame tube junctions and welds
as well as all the components for damage or excessive wear.
If in any doubt, please contact our technical support team
at 503 954 2410 or take it to a qualifi ed bicycle mechanic for
inspection.
Please note your bike is not intended for the following types
of riding:
• Dirt jumping
• BMX
• Four-cross
Beinn 20 Small / Beinn 20 L / Beinn 24 / Beinn 26 S / Beinn 26 L
• Downhill
• Slalom
Step 6 of 6

Adjust saddle height

Tighten
a.
Loosen seatpost clamp
b.
Move to desired height
c.
Tighten clockwise max. 4Nm
Seatposts are clearly marked with minimum insertion mark.
Please do not raise saddle above this line.
E-mail: support@islabikes.com
Telephone: 503 954 2410

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Beinn and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF