1. Manuals
  2. Brands
  3. ISLABIKES Manuals
  4. Bicycle
  5. Beinn 29
  6. Owner's manual

ISLABIKES Beinn 29 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Beinn 29
Owner's manual
www.islabikes.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Beinn 29 and is the answer not in the manual?

Questions and answers

Related Manuals for ISLABIKES Beinn 29

Summary of Contents for ISLABIKES Beinn 29

  • Page 1 Beinn 29 Owner’s manual www.islabikes.co.uk...
  • Page 2 Setting up your Beinn 29 Brake levers 13. Handlebars Brake callipers 14. Rim Rotors 15. Spokes Saddle 16. Tyres Seatpost 17. Chain Seatpost clamp 18. Rear derailleur Saddle clamp 19. Cassette Stem 20. Frame Stem bolts 21. Fork 10. Headset 22.
  • Page 3 Remove front wheel protection packaging. Remove fork and brake calliper plastic protection packaging. c. Install front QR from pedal box. Do not pull brake when calliper spacer is removed. Please keep calliper spacer for transportation when wheel is removed. Beinn 29 www.islabikes.co.uk...
  • Page 4 – if it is too tight or too loose you can adjust by holding lever ‘open’ again and turning nut. Check front wheel is correctly installed by lifting the handlebar and holding the wheel at the fork. Firmly push from side to side. If there is no movement the wheel is fitted correctly. Beinn 29 www.islabikes.co.uk...

  • Page 5: Handlebar Set Up

    Failure to correctly tighten stem clamp bolt may result in serious injury or death. If in doubt, please consult our technical support Please ensure you identify the left and right pedals team on +44 (0)1584 856 881 or before installing. email techsupport@islabikes.co.uk. Beinn 29 www.islabikes.co.uk...

  • Page 6: Adjust Saddle Height

    Important: do not lock up the wheels at any point during the bed-in procedure. Allow the brakes to cool prior to any additional riding. If you require further information about your brakes, contact our technical support team on +44 (0)1584 856 881 or email techsupport@islabikes.co.uk. Loosen seatpost clamp Move to desired height Tighten clockwise max.

  • Page 7: Safety First

    Your Islabike is set up so that the right hand brake lever operates the front brake. Where the destination country drive on the right (with the exception of our balance bike) the right hand brake lever will operate the rear brake. Beinn 29 www.islabikes.co.uk...
  • Page 8 Discontinue use immediately if anything untoward is spotted and contact our technical support team on +44 (0)1584 856 881 or email techsupport@islabikes.co.uk. Beinn 29 www.islabikes.co.uk...

  • Page 9: Maintenance

    +44 (0)1584 856 881 or email techsupport@islabikes.co.uk. Brake operation – Pull on one brake at a time and look at the brake pads.

  • Page 10: Tyres And Tubes

    Inflate to correct pressure and then carefully re-tighten to close the valve. Use our guide to inflate your tyres, http://www.islabikes.co.uk/info-hub/ how-to-inflate-your-tyres-video. Valve closed...

  • Page 11: Recommended Torque Settings

    Please visit our website for a list of readily available spares or Your Islabike has had its gears adjusted prior to delivery. These should be contact us on +44 (0)1584 856 881 or email info@islabikes.co.uk. checked periodically or after a fall to ensure they are operating correctly.

  • Page 12: Frame Number

    Please make a record of your frame number. This is a combination of letters and numbers unique to your bike stamped to the underside of the frame. This is required by police and insurance companies in case of loss. Frame number Beinn 29 www.islabikes.co.uk...
  • Page 13 www.islabikes.co.uk...

Table of Contents