The Land of Nod SIMPLE Twin-over-twin Bunk Bed Assembly Instructions page 4

A
small
guard rail
A. Determine desired orientation of bunk beds. Attach
small guard rail to top frame assembly with 4 phillips
bolts, 4 spring washers, 4 flat washers as shown,
using a screwdriver. Secure small guard rail to
footboard with 1 allen bolt, 1 spring washer, 1 flat
washer as shown, using an allen wrench.
B. Attach large guard rail to top frame assembly with
5
6 phillips bolts, 6 spring washers, 6 flat washers..
Secure large guard rail to headboard/footboard with 2
allen bolts, 2 spring washers, 2 flat washers.
Fit hooks of ladder over top bed assembly as
shown. Make sure holes of ladder are aligned with
corresponding holes of bed. At this point, secure
7
ladder with 2 small screws, using a screwdriver.
Assembly is now complete.
Made in Vietnam - r13
B
large
guard rail
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
TWIN-OVER-TWIN BUNK BED
A. Insert 4 metal dowels into bottom frame
assembly as shown.
B. With assistance of another adult, fit holes of top
6
bed assembly onto corresponding dowels of
bottom bed assembly as shown.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.
SIMPLE
B
A
Page 3 of 3