Cargo Twin-over-Full Bunk Bed
!
WARNING
- STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
- Do not suspend strings over a bed for any reason.
- Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and well.
- Do not allow children under 6 years of age to use the upper bunk.
- Do not allow more than one person on upper bunk at a time.
- Always use the ladder for entering and leaving the upper bunk.
- Use of night light may provide added safety precautions for a child using the upper bunk.
- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
- Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
- The intended mattress dimension on the be are as follow:
Twin: 37-1/2"-38-1/2"W x 74"-75"L x 9"thickness (maximum)
Full: 53"-54W x 74" – 75"L x 9"thickness (maximum)
- Ensure thickness of mattress does not exceed 9" and the mattress is at least 5" below upper
edge of guardrails. - The use of water or sleep otation mattresses is prohibited.
- Do not use substitute parts. Contact the Land of Nod® for replacement parts, hardware or
additional guardrails.
- Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
- Periodically check and ensure that the guardrail, ladder and other compenents are in their proper
position, free from damage, and that all connectors are tight.
- Keep these instructions for future reference.
Made in Vietnam - r02
8135 River Drive Morton Grove, IL 60053 p: (800) 933-9904 e: customerservice@landofnod.com www.landofnod.com
The Land of Nod
Need help?
Do you have a question about the Cargo Twin-over-Full Bunk Bed and is the answer not in the manual?
Questions and answers