Chapter 7 Encryption; Load An Encryption Key; Table 7-1. Kit Numbers For Secure-Enabled Boards - Motorola APX 3000 Basic Service Manual

Chapter 7 Encryption

This chapter provides procedures for using the encryption capability of your radio. The following
procedures are outlined:
• Loading an encryption key
• Selecting an encryption key
• Erasing an encryption key
7.1

Load an Encryption Key

Keys will be loaded from the KVL to the radio in either clear or encrypted form depending on the
configuration of the CPS parameter "KVL – FIPS Level 3 Approved Mode". If the parameter is
disabled, keys will be sent in clear form; if the parameter is enabled, keys will be sent to the radio in
encrypted form.
NOTE: A KVL3000 Plus with software version R03.52.45 or greater must be used to load keys to a
radio with "KVL – FIPS Level 3 Approved Mode" enabled.
To load an encryption key:
1. Refer to the key-variable loader (KVL) manual for equipment connections and setup.
2. Attach the KVL to the radio.
3. Refer to the KVL manual for how to load the encryption keys into the radio.
4. When the key is loaded successfully, you will hear:
• On single-key radios – a short tone.
• On multikey radios – an alternating tone.
The secure kits for APX 3000 are identified by the following kit numbers:
Kit Number
NNTN8421_
NNTN8422_
NNTN8424_
NNTN8423_
NNTN8439_
NNTN8440_
NNTN8441_
NNTN8415_
NNTN8416_
NNTN8417_

Table 7-1. Kit Numbers for Secure-Enabled Boards

APX3000 ADP KIT (UHF1)
APX3000 ADP/DES/DES-XL/DES-OFB KIT (UHF1)
APX3000 ADP/AES KIT (UHF1)
APX3000 ADP/DVP-XL KIT (UHF1)
APX3000 ADP/DVP-XL/AES KIT (UHF1)
APX3000 ADP/DVP-XL/DES/DES-XL/DES-OFB KIT (UHF1)
APX3000 ADP/AES /DES/DES-XL/DES-OFB KIT (UHF1)
APX3000 ADP KIT (700/800 MHz)
APX3000 ADP/DES/DES-XL/DES-OFB KIT (700/800 MHz)
APX3000 ADP/DVP-XL KIT (700/800 MHz)
Description