Figure 8-22. Assemble Back Kit And Front Kit Together; Figure 8-23. Engaging Hook And Seating Cover - Motorola APX 3000 Basic Service Manual

8-18
3. With the Chassis assembly fully slided in, press down the bottom part of the Chassis to lock
the two subassemblies (A and B) together as shown in
B
Back Kit
Assembly
A
Front Kit Assembly
8.6.5 Reassemble the Accessory-Connector Cover
1. Insert the hooked end of the cover into the pocket. Engage the hook beneath the undercut
and swing the cover down onto the radio. Ensure the cover is seated properly and the screw
is aligned into the threaded hole.

Figure 8-22. Assemble Back Kit and Front Kit together

Figure 8-23. Engaging Hook and Seating Cover

Disassembly/Reassembly Procedures: Radio Reassembly
Figure 8-22.
Top Hooked End
Thumb Screw