Midi File Playback - cymatic audio uTrack 24 User Manual

13.10. MIDI File Playback

The uTrack24 contains a standard 5-pin MIDI output connector on its rear panel. This connector
can be used to play back MIDI data from a Standard MIDI File (also known as an "SMF").
The SMF can be placed in a uTrack24 multitrack audio project using Cymatic Audio's "uTool"
software. For complete details on the operation, please refer to the latest version of the uTool
user's manual, available at
The playback of the SMF is synchronized with the audio files that are played back from the same
project. This allows the uTrack24 to output MIDI data to a wide variety of destinations, such as:
• A digital synthesizer that plays back live audio tracks in sync with pre-recorded audio
• A MIDI controlled lighting system that switches lighting controls, precisely times in sync with
pre-recorded audio
• A MIDI controlled audio effects processor, switching to different effects during different
points on the project timeline
!
NOTE: Playback will run until the longest file(midi or audio) is completed. Gapless playback of the
next song does not happen in playlist, if it has a midi file associated with it.
USER'S MANUAL
22
www.cymaticaudio.com/downloads
GETTING STARTED WITH RECORDING AND PLAYBACK