Ordering - GE D60 Instruction Manual

2 PRODUCT DESCRIPTION
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
2
Breaker Arcing Current (I t)
Breaker Control
Contact Inputs (up to 96)
Contact Outputs (up to 64)
Control Pushbuttons
Data Logger
Digital Counters (8)
Digital Elements (16)
Direct Inputs/Outputs (32)
DNP 3.0 or IEC 60870-5-104 Comms
Event Recorder
Fault Detector and Fault Report
The relay is available as a 19-inch rack horizontal mount unit or a reduced size (¾) vertical mount unit, and consists of the
following modules: power supply, CPU, CT/VT, digital input/output, transducer input/output. Each of these modules can be
supplied in a number of configurations specified at the time of ordering. The information required to completely specify the
relay is provided in the following table (see Chapter 3 for full details of relay modules).
GE Multilin
FUNCTION
Fault Locator
FlexElements™ (16)
FlexLogic™ Equations
IEC 61850 Communications
Line Pickup
Metering: Current, Energy, Frequency,
Power, Power Factor, Voltage
Modbus User Map
Non-Volatile Latches
Non-Volatile Selector Switch
Oscillography
D60 Line Distance Relay
2.1 INTRODUCTION
FUNCTION
Pilot Schemes
Setting Groups (6)
Time Synchronization over SNTP
Transducer Inputs/Outputs
User Definable Displays
User Programmable LEDs
User Programmable Pushbuttons
User Programmable Self-Tests
Virtual Inputs (32)
Virtual Outputs (64)
VT Fuse Failure

2.1.2 ORDERING

2
2-3