Samsung HW-H600 User Manual page 16

Bluetooth POWER on (Bluetooth
When the Btuetooth Power On function is on and
the SoundStand is turned off, if a previously paired
Btuetooth device tries to pair with the SoundStand,
the SoundStand turns on automatically,
!. Pressthe Btueteoth POWERb_stton on the
SoundStand remote control,
2. Btuetooth POWERon appears on the
SoundStand's display,
• Available onty if the SoundStand is tisted
among the Btuetooth device's paired
device£ (The Btuetooth device and the
SoundStand must have been previously
paired at least once,)
• SoundStand wit1appear in the Btuetooth
device's searched devices tist only when
the SoundStand is displaying [BT READY],
• tn the TV SoundConnect mode, the
SoundStand cannot be paired to another
Btuetooth device,
• tf the SoundStand is connected to a TV
through TV SoundConnect, and you turn
the SoundStand off by turning off the TV,
the Bluetooth Power function wit1not turn
the SoundStand on,
To disconnect the Bluetooth
device from the SoundStand
You can disconnect the Btuetooth device from the
SoundStand, Forinstructions, see the Btuetooth
device's user manuat,
• The SoundStand wit1be disconnected_
• When the SoundStand is disconnected from the
Btuetooth device, the SoundStand win display
BT DBSCONNECTED o n the front display,
To disconnect the SoundStand
from the Bluetooth device
Pressthe SOURCE button on the remote control or
the ( R ) button on the product's top panel to
switch from ST to another mode or turn off the
5oundStand,
• The connected Btuetooth device wit1wait a
certain amount of time for a response from the
5oundStand before terminating the connection,
(Disconnection time may differ, depending on
the Btuetooth device)
• tn Btuetooth connection mode, the
Btuetooth connection wit1be tost if the
distance between the SoundStand and
the BhJetooth device exceeds t 6,25 ft,
(SmL
• tf the Btuetooth device comes back into
the effective range after disconnecting,
you can resta¢ the SoundStand to restore
the pairing with the Btuetooth device,
• The SoundStand automatically turns off
after 25 minutes in the Ready state,
More About Bluetooth
Btuetooth is a technology that enables Bluetooth-
compliant devicesto interconnect easity with each
other using a short wireless connection,
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
A part of your body is in contact with the
receiving/transmitting system of the
Btuetooth device or the 5oundStand,
tt is subject to electrical variation from
obstructions caused by a watt, corner, or
office partition,
tt is exposed to electrical interference from
same frequency-band devices including
medicat equipment, microwave ovens, and
wireless LANs,
• Pairthe SoundStand with the Btuetooth device
white they are dose together,
• The fuCher the distance between the
SoundStand and Btuetooth device, the worse the
quality is,
tf the distance exceeds the Btuetooth operational
range, the connection is tost,
• tn poor reception-sensitivity areas, the Btuetooth
connection may not work property,
• The Bluetooth connection only works when it is
dose to the unit_ The connection wit1be
automatically cut off if the Btuetooth device is
out of range, Even within range, the sound
quality may be degraded by obstacles such as
watts or doors,
• This wireless device may cause electric
interference during its operation,
16