Samsung HW-H600 User Manual page 15

You can use a Btuetooth device to enjoy music with high quatity stereo sound, att without wires!
To connect the SoundStand to a Bluetooth device
Check if the Bluetooth device suppo4s the Btuetooth compliant stereo headset function_
o Connect
!. Pressthe SOURCE button on the remote
control or the ( F. ) button on the product's top
panel to display the BT message,
2. Selectthe Bhsetooth menu on the Bluetooth
device you want to connect, (Refer to the
Bhsetooth device's user manuat,)
3. Selectthe Stereo headset menu on the Bhsetooth
device,
• You will see a list of scanned devices,
4. Select "ISamsung] SoundStand" from the tist,
• When the SoundStand is connected to the
Bhsetooth device, it wit1display [Sluetooth
device name] --_STon the front display,
• The device name can onty be displayed in
English, An underline "_" wit1be displayed if
the name is not in English,
• tf the Btuetooth device has faited to pair with
the SoundStand, delete the previous
"[Samsung] SoundStand" found by the
Bhsetooth device and have it search for the
SoundStand again,
5. Playmusic on the connected device,
• You can tisten to the music playing on the
connected Btuetooth device over the
SoundStand,
• tn BT mode, the PbyiPauseiNext/Prev
functions are not avaitabte_ However, these
functions are available in Btuetooth devices
supporting AVRCR
Stuetooth device
• tf asked for PIN code when connecting a
Btuetooth device, enter <0000>,
• Only one BhJetooth device can be paired
at a time,
• Btuetooth connection wit1be terminated
when you turn the SoundStand off,
• The SoundStand may not pedorm
BhJetooth search or connection correctly
under the following circumstances:
- tf there is a strong electrical field around
the SoundStand,
- tf severat BhJetooth devicesare
simultaneously paired with
SoundStand,
- tf the Btuetooth device is turned off,
not in place, or malfunctions,
- Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range asthe
Btuetooth device, which can cause
electric intederence,
• The SoundStand suppo_s SBCdata
(44,1kHz, 48kHz),
• Connect only to a Btuetooth device that
supports the A2DP (AV) function,
• You cannot connect the SoundStand to a
Bluetooth device that supports onty the HF
(Hands Free) function,
15