Samsung SE-208BW User Manual page 22

SE-208BW User manual
7. The iSCSI Initiator configuration has been completed.
How to configure the settings of the Optical Smart Hub
How to log in the Optical Smart Hub
1. Run a web browser and enter
2. When the Optical Smart Hub log-in page is displayed, enter your password.
There is no password set in the factory default state. When you connect to the Optical Smart Hub for the first time, click th
Login
button without entering a password.
For security, set your password. For detailed information on how to set your password, refer to the "How to configure
System - Admin" section.
How to configure System
To configure the system setting of the Optical Smart Hub, click 'System' from the menu at left. After changing any settings, you must cli
the Save button to save the changes.
Admin
Remote Management Port: Set the port used for remote management.
Important
Be careful that the port is not duplicated with the ports of other network services. (e.g. FTP: port 21)
If the port you set is blocked by the firewall, the Optical Smart Hub may not operate normally. (For detailed
information on the firewall, consult your ISP or network administrator.)
file:///N|/TSST-Project/EN/index.html[2011-11-08 오후 2:30:46]
http://Optical Smart Hub in the address box.