Table of Contents
Advertisement
SE-208BW User manual
2. A window as shown in the figure will be displayed. Then enter the SSID and password of the
Optical Smart Hub and then click the
Note
For the factory default SSID and password, see the label attached to the bottom side of the Optical Smart Hub.
3. The PC finds and connects to the Optical Smart Hub via Wi-Fi.
4. When connected, the connected Optical Smart Hub is displayed as shown in the figure at right. If you
want to change the SSID and password, enter a new SSID and password and then click the
button.
Note
If you don't want to change them, leave the input fields blank and click the
5. The Wi-Fi configuration has been completed. Click the
where you can configure the local network connection.
How to configure the local network connection
file:///N|/TSST-Project/EN/index.html[2011-11-08 오후 2:30:46]
Next
button.
Next
button to move to the window
Next
Next
button.
Hide quick links:
Advertisement
Table of Contents
