Name
Color
Status
USR-NET
Green
On, solid
On, blinking
Off
USR-
Green
On, solid
OpenVPN
Off
USR-IPsec
Green
On, solid
Off
USR-WiFi
Green
On, solid
Off
Green
On, solid
On, solid
On, solid
Off
On, blinking
Description
Network is joined successfully and
worked in an optimum one
Network is joined successfully but
worked in a lower-level than
standard
Network is not joined or joining
OpenVPN connection is established
OpenVPN connection is not
established
IPsec connection is established
IPsec connection is not established
WiFi is enabled and working
properly
WiFi is disabled or not working
properly
High Signal strength (21-31) is
available
Medium Signal strength (11-20) is
available
Low Signal strength (1-10) is
available
No signal
When the network is disconnected,
those three signal LEDs are
designed as a binary combination
code to indicate a series of error
report.
Blinking: 1
Off: 0
001
AT command failed
010
no SIM card detected
011
need to enter the PIN code
100
need to enter the PUK code
101
registration failed
110
module error
111
not support the module
4. Reset Button
Function
Operation
Reboot
Press and hold the RST button for 2 to 7 seconds under
the operating status.
Restore to factory
Wait for 5 seconds after powering up the router, press
default settings
and hold the RST button until all six LEDs start blinking
one by one, and release the button to return the router
to factory defaults.
5. Ethernet Port
There are two Ethernet ports on R2000 Router, including ETH0 and ETH1. The
ETH0 on the router can be configured as either a WAN port or LAN port, also
can be assigned as a PoE port, while ETH1 can only be configured as a LAN
port. Each has two LED indicators. The yellow one is a link indicator but the
green one doesn't mean anything. For details about status, see the table
below.
Indicator
State
Link indicator
On, solid
On, blinking
Off
-3-
Description
Connection is established
Data is being transferred
Connection is not established
Need help?
Do you have a question about the R2000 and is the answer not in the manual?
Questions and answers