558
7-2. Steps to take in an emergency
Installing the spare tire
Remove any dirt or foreign matter
1
from the wheel contact surface.
If foreign matter is on the wheel contact
surface, the wheel nuts may loosen
while the vehicle is in motion, causing
the tire to come off.
Install the spare tire and loosely
2
tighten each wheel nut by hand by
approximately the same amount.
Tighten the wheel nuts until the tapered
portion comes into loose contact with
the disc wheel seat.
Lower the vehicle.
3
Firmly tighten each wheel nut two or
4
three times in the order shown in the
illustration.
For vehicles with wheel lock nuts,
tighten the wheel lock nut last
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
Stow the flat tire, tire jack and all tools.
5
RX450h_U_OM0E023U
Tapered portion
Disc wheel
seat
Need help?
Do you have a question about the RX 450H and is the answer not in the manual?
Questions and answers