Toshiba Strata DK User Manual page 32

Features
Switch From Outside Voice Call to Data Call
l
1. Verify
communications from
your PC or terminal
by typing AT and
pressing Enter on
your PC or terminal.
2. Establish an external
voice call.
3. Press
your data telephone.
4. Press the
button again.
5. Press
your data telephone.
24
The following screen displays on your PC or terminal
screen.
This display verifies that communications exist
between your PC or terminal and your data telephone.
Note
The normal method establishes your voice call. You
can do this before verifying communications.
0RGHP
on The Modem LED flashes red.
This flash indicates that a system modem is reserved.
The modem is reserved for 60 seconds. The voice call
continues during this time.
0RGHP
If the LED turns OFF before a modem is accessed, this
reserves another 60 seconds. The voice call continues
during this time.
'DWD &DOO
on The Data Call LED lights red. The Modem LED stops
flashing and stays red.
The CO line you were talking on is picked up by the
internal modem. The CO line LED blinks and changes
from green to red, or if the call was on [DN], the [DN]
LED turns OFF.
AT
OK
AT commands must be typed as capital letters
(use caps lock), and they appear on your PC or
terminal screen as you type them.
Strata DK PC/Data Interface 5/00