Toshiba Strata DK User Manual page 30

Features
Incoming Data Call (External)
2. Type ATDD , the
[PDN] of the
PDIU-DS or data
telephone connected
to the internal device
you wish to connect
to, and then press
Enter on the
external PC or
terminal.
3. Exchange the data.
To terminate the call from the external PC or terminal
1. Hold down the
Shift key and type
+++ on the external
PC or terminal.
22
Wait for the following screen to display on your
(external) PC or terminal screen.
ATDDYYY
CONNECTXXXX
This display indicates that the external PC or terminal
and the internal data device are connected.
XXXX = data transmission speed
YYY = station number of the DIU
If calling a device connected to a PDIU-DS, the
CONNECT LED turns ON; if calling a device
connected to a data telephone, the Data Call LED turns
ON (red).
Entry example: If the station number of the DIU is
210, type ATDD210 and press Enter . (ATDD is the
DIU command for data dialing, and 210 is the number
of the DIU.)
The data can be exchanged by using your terminal or
PC software program.
The following screen displays on your (external) PC or
terminal screen.
+++
OK
Strata DK PC/Data Interface 5/00