Tips For Multiple Floors - Matterport Scan a Space User Manual

Tips for multiple floors
User Guide - Scan a Space (Camera & Capture)
Remember to mark any windows and mirrors on the staircase.
Sunken living rooms belong to the floor they are closest to.
Split levels (levels halfway between two full floors) belong to the floor below.
You can move scans to other floors. From the home screen tap
Edit > (tap the scans to move) > Move to Floor > (which floor)
If you want to go back to a previously completed floor and add more scans, tap
the ​ F loor​ menu, the floor name, and then start scanning. This is important since
alignment is done on a per-floor basis​ . Remember that your new scan should
be within a line-of-sight of a previous scan.
To further manipulate floors, tap ​ E dit​ at the top of the
Floor Screen.
To delete a floor tap the red circle.
To rename a floor tap the floor label.
To reorder a floor tap and hold the three bars on the
right.
Tap ​ D one​ when finished.
20