Table of Contents
Advertisement
> Before Start
> Part Names
Step3: Connect the TV & AV Components
TV
a HDMI cable, b Digital optical cable
16
> Install
> Initial Setup
a
b
> Playback
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
1. Connect the TV
To ARC TV
For a TV that supports the ARC (Audio Return Channel) (*)
feature, use an HDMI cable and connect according to
illustration "a". Choose an HDMI IN jack on the TV that
supports ARC when connecting.
Setup
0 Settings are required to use the ARC function.
Select "Yes" in "4. Audio Return Channel" (P22)
in the Initial Setup.
0 Please refer to the TV's operation manual for
directions on connections and setup for the TV.
To Non-ARC TV
For a TV that does not support the ARC (Audio Return
Channel) feature (*), connect both the HDMI cable in
illustration "a" and the digital optical cable in "b".
0 Connection with a digital optical cable is not necessary if
you will watch TV through a device such as a cable set-
top box (that is, not use a tuner built into the TV) that you
have connected to the input jack on this unit.
(*) The ARC feature:
This feature transfers TV audio signals via HDMI cable so
that you can play the audio from the TV through this unit.
Connection to an ARC compatible TV is complete with one
HDMI cable. Refer to the instruction manual for your TV to
see if it supports ARC.
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the VSX-932 and is the answer not in the manual?
Questions and answers
VSX-932, Ekraanile ilmub NG: LCRSLSRBLBR; DET: PROTECT: I
The error message "NG: LCRSLSRBLBR; DET: PROTECT: I" on the Pioneer VSX-932 receiver indicates that the protective circuit has been activated, likely due to a short circuit or overheating. Possible causes include speaker wires touching each other or the back panel, or the unit reaching an abnormally high temperature. To resolve this, check and ensure that speaker wires are properly connected without any shorts, provide adequate ventilation for the unit, and restart it by unplugging the power cord for at least 5 seconds before plugging it back in. If the issue persists, contact a dealer for further assistance.
This answer is automatically generated