Page 1
Quick Start Guide Guide rapide Register your product at http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) AV Receiver VSX- Récepteur AV...
English VENTILATION CAUTION Thank you for buying this Pioneer product. This Quick Start Guide includes instructions for basic connections and operations to When installing this unit, make sure to leave space allow simple use of the receiver. For detailed descriptions of the receiver, see the “Operating Instructions” provided on the...
Page 3
Connection and initial setup Perform connection and initial settings in any of the ways listed below. Follow the guidance of the built-in Follow the instructions in the Use “Start-up Navi” app to perform AVNavigator to perform connection booklet to perform connection connection and initial settings and initial settings and initial settings...
If you have a Mac/PC Connecting to the network through LAN interface Plugging in the receiver After connecting to a LAN, connect the power cord of the Internet receiver to a power outlet. Modem Plug the supplied power cord into the AC IN socket on the Router back of the receiver.
Enter number in 2 above in the field in Operating environment Launching the built-in AVNavigator Internet Explorer shown below and then press • AVNavigator can be used in the following environments. Operate AVNavigator by following the screen prompts of your the ENTER key.
Follow the booklet instructions to perform connection and initial settings Connecting up Placing the Speakers L – Front Left C – Center TMdL TMdR R – Front Right SL – Surround Left SR – Surround Right SBL – Surround back Left SBR –...
Connecting up Connecting the speakers Center Front Right Subwoofer Front Left (SW) Be sure to complete all connections before connecting this unit to the AC power source. LINE LEVEL You can use speakers with a nominal INPUT impedance between 6 Ω and 16 Ω. Connecting the speakers.
Check the power cord once in a setting screen from the TV unless this while. When you find it damaged, ask your nearest Pioneer OPTICAL cable is connected. authorized service center or your dealer for a replacement.
Initial Setup Before you start Automatically setting up for surround sound (MCACC) Press MAIN RECEIVER on the remote control, Put the batteries in the remote control. The Auto Multi-Channel ACoustic Calibration (MCACC) setup uses the supplied setup microphone to measure and analyze then press the ENTER button.
Basic playback Switch on the playback component. Multichannel playback To enjoy the many functions of the E.g.) Turn the Blu-ray Disc player connected to the HDMI BD IN terminal on. unit to the fullest extent STANDBY/ON SOURCE Switch the input of the receiver. ALL ZONE STBY E.g.) Press BD to select the BD input.
Français PRÉCAUTION DE VENTILATION Merci pour l’achat de ce produit Pioneer. Ce guide rapide contient les instructions relatives aux raccordements et opérations de Lors de l’installation de l’appareil, veillez à laisser un base permettant une utilisation simple de ce récepteur. Pour des descriptions plus détaillées du récepteur, référez-vous au espace suffisant autour de ses parois de manière à...
Page 13
Raccordement et configuration initiale Procédez à la connexion et aux réglages initiaux selon l’une des méthodes énumérées ci-dessous. Utilisez l’application “Start-up Navi” Suivez les directives du AVNavigator Suivez les instructions dans le livret pour effectuer la connexion et les intégré pour procéder à la connexion et pour procéder à...
Si vous avez un Mac ou un PC Raccordement au réseau par l’interface LAN Branchement du récepteur Après la connexion à un réseau LAN, branchez le cordon Internet d’alimentation du récepteur à une prise électrique. Modem Branchez le cordon d’alimentation fourni à la prise AC IN Routeur située à...
Saisissez le numéro de l’étape 2 ci-dessus Environnement d’exploitation Lancement de l’AVNavigator dans le champ d’Internet Explorer indiqué ci- • L’AVNavigator peut être utilisé dans les environnements intégré dessous, puis appuyez sur la touche ENTER. suivants. Utilisez AVNavigator en suivant les invites sur l’écran de votre ®...
Suivez les instructions dans le livret pour procéder à la connexion et aux réglages initiaux Raccordement Installation des enceintes L – Avant Gauche C – Centre TMdL TMdR R – Avant Droite SL – Surround Gauche SR – Surround Droite SBL –...
Raccordement Raccordement des enceintes Centre Avant Droite Caisson de grave Avant Gauche (SW) Assurez-vous que tous les branchements ont été effectués correctement avant de raccorder cet appareil au secteur. LINE LEVEL INPUT Vous pouvez utiliser des enceintes ayant une impédance nominale comprise entre 6 Ω et 16 Ω. Raccordement des enceintes.
électrique. Vérifier le câble d’alimentation de temps HDMI IN configuration sur le DIGITAL AUDIO OUT en temps. Contacter le service après-vente Pioneer le plus téléviseur. proche ou le revendeur pour un remplacement. • Lorsque le récepteur n’est pas utilisé régulièrement Téléviseur compatible HDMI/DVI...
Configuration initiale Préparatifs Configuration automatique du son surround (MCACC) Appuyez sur MAIN RECEIVER de la télécommande, Insérez les piles dans la télécommande. Le système de calibrage acoustique multicanaux (Multi- Channel ACoustic Calibration, MCACC) utilise le microphone puis appuyez sur la touche ENTER. de configuration fourni pour mesurer et analyser la tonalité...
Lecture de base Allumez le lecteur. Lecture multicanaux Pour profiter au maximum des Ex.) Allumez le lecteur de disque Blu-ray raccordé à la prise HDMI BD IN. nombreuses fonctions de l’appareil STANDBY/ON SOURCE Sélectionnez l’entrée du récepteur. ALL ZONE STBY Ex.) Appuyez sur BD pour sélectionner l’entrée BD.