level/polarity Key The level option allows you to set the trigger level that is applicable only to
field Key
line Key
holdoff Key
Trigger Menu
6-28
tv
source.
the
trigger
•
Press the selection key again and the highlighted window moves to the
polarity option and allows you to select the rising edge or falling syoc
pulses to trigger on.
The field key allows you to select field, 1 or 2.
The line key allows you to select which line the trigger
on. This selection is dependent upon which field has been selected
previously.
If
the previous selection
available depend upon which field, 1 or 2 is selected:
•
If
field 1 is selected, you
•
If
field 2 is selected, you
tv
This
trigger mode is compati b le with broadcast standard
Hz,
625
50
If
the
lines standard is selected, the options are also dependent
upon field settings:
•
If
field 1 is selected the range of lines is from 1 to
•
If
field 2 is selected the range of lines
This tv
trigger mode is compatI b le with broadcast standards:
H, 1, K, Kl, L, and
N.
The holdoff key enables the oscilloscope to hold off the trigger event from
40
ns to 320 ms and is incremented in 20 ns time frames.
Hz,
is
60
the
525 lines standard, the options
can
select from line 1 to 263 in field 1.
choose from line 1 to 262 in field 2.
can
if
from 314 to 625.
will
be generated
M.
313,
E,
C, D,
G,