Advertisement
Quick Links
Installation Instructions
And Owners Manual
MT2
Monster Tower, Inc.
1704 Henry G Lane St
Maryville, TN 37801
Phone: 877-77-Tower
Fax: 877-232-6538
www.MonsterTower.com
Support@MonsterTower.com
Reference 13August2014
It is critical to lubricate bolt threads with included Anti-Seize
before installing Nylock Nuts to prevent the precision stainless steel
hardware from galling and locking, even if you are test-fitting parts together
before installation.
Leave Legs and Top Section protected with bubble wrap sleeves, removing
only the ends as needed, to protect the boat and tower during installation.
THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED
IN ANY WAY WITH YOUR NEW MT2, PLEASE CONTACT US IMMEDIATELY. Our
entire purpose as a company is to create great products at affordable prices that
our customers love.
IMPORTANT
Please take a few minutes to read the installation instructions and become
familiar with the MT2 parts and installation before beginning to ensure a high
quality, trouble free installation. If you have any questions during your
installation give us a call at 877-77-Tower or e-mail Support@MonsterTower.com
1 of 12
Pg
Reference 13August2014
Copyright 2002-2009, Monster Tower, Inc.
Advertisement
Related Manuals for monster tower MT2
Summary of Contents for monster tower MT2
- Page 1 IMPORTANT Please take a few minutes to read the installation instructions and become familiar with the MT2 parts and installation before beginning to ensure a high quality, trouble free installation. If you have any questions during your installation give us a call at 877-77-Tower or e-mail Support@MonsterTower.com...
- Page 2 Visit the support information at www.MonsterTower.com for additional information including details on customer installations. Call us at 877-77-Tower if you have any questions or concerns during the installation. Read the entire instruction manual before beginning 2 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 3 Getting to Know your MT2 Tower Parts & Assembly Diagrams The MT2 is an innovative design in the Wakeboard Tower market that uses many common parts and design elements that make it affordable and easy to install. There are three main components of the design as shown in the Assembly Diagram: front legs, rear legs and the top section.
- Page 4 The unique Base Assembly of the MT2 includes: a base fastened to the boat, and a base swivel that allows for mounting the top, outside, or angle of the side of the boat. The Heim joint has three purposes. First, it allows the base to mount if your boat has a slight angle at the mounting areas.
- Page 5 You can also put towels or tarps on your deck for added protection. Customer photos on our website can also be a help for where to mount the tower. 5 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 6 Mark the base locations on the tape and double check the distance from the back of each base to the rear corner of the boat (or other reference point) to make sure they are positioned in the same location on each side of the boat. 6 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 7 The masking tape makes it easy to accurately mark the holes. To make drilling easier we recommend center punching the marks so the drill bit does not wander when drilling. 7 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 8 Tighten these by hand; do not use a drill or pneumatic / air driver. There is not a specific torque specification since each boat is different. Tighten the M8 8 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 9 Do this by measuring from the base on one side to the rear swivel on the other side as shown on page 10. Check both sides until the measurements are 9 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 10 The final step is to double check all fasteners, making sure they are tight, especially the top section set screws and jam nuts tightened against the leg rod end support. The tower is now ready for use. The MT2 IS ABSOLUTELY SILENT when installed 10 of 12 Reference 13August2014 Copyright 2002-2009, Monster Tower, Inc.
- Page 11 - Always understand and follow the warnings on the tower warning label Monster Tower, Inc. - 5 Year Warranty - Monster Tower warrants that for a period of 5 years from the date the tower is sold at retail, that Monster Tower will repair directly, or supply parts for the repair of any material cracks, fractures or structural failures that are a result of a manufacturing defect.
-
Page 12: Appendix A - Wiring Instructions For Your Mt2
Wiring Instructions for your MT2 If you add speakers or lights to your MT2, you can hide the wires inside of the rear legs of the tower as well as in the straight cross member of the top section. Since the mating parts insert ½” inside each end of the rear leg you can drill 1”...
Need help?
Do you have a question about the MT2 and is the answer not in the manual?
Questions and answers