SNMP Settings
Configure the SNMP host settings to allow sending Network Status Events and receiving Network Status Event
notifications:
•
Send SNMP Trap To
no traps to any host.
•
SNMP Community String
•
- SNMP version to use in the reader. Supported versions are
SNMP Version
•
Send Server Heartbeat
NOTE Send SNMP Trap To and Send Server Heartbeat take effect immediately after clicking Set Properties.
However, perform a Commit to persist the changes. The modified SNMP Community string and SNMP
Version are not affected until the reader reboots.
Reader Communications Parameters (SNMP) Window
Figure 4-23
- Configures the host IP address to which the SNMP trap is sent. Leave this blank to send
- SNMP community string to use for SNMP set and get.
- Sends heartbeat message periodically to the configured SNMP host.
Administrator Console 4 - 23
and
.
V1
V2c