Chapter 3 Installation and Communication
Introduction
This chapter includes the following FX Series RFID reader installation and communication procedures:
•
Unpack the Reader on page 3-1
•
Installation on page 3-2
•
Mounting and Removing the Reader on page 3-2
•
Connecting Antennas on page 3-4
•
Powering the Reader on page 3-5
•
Verifying Hardware Functionality on page 3-5
•
Communications Connections on page 3-6
•
Ethernet Connection on page 3-6
•
USB Connection on page 3-7
Unpack the Reader
Remove the reader from the shipping container and inspect it for damage. Keep the shipping container, it is the
approved shipping container and should be used if the reader needs to be returned for servicing.