Firmware Update - Televes 593301 Instruction Manual

H30FLEX handheld DVB meter /
Uploads to your meter the
configuration saved in the

Firmware update

There are two ways to update the firmware of your
meter.
The first one is using the web application, ex-
plained in the paragraph 4. Update of the section
Web Application
The second one isusing the USB Storage feature of
the Setup Menu (see section 9. Setup of the point
Product Operation).
To update the firmware using this procedure, fol-
low the next indications:
1.- The first thing that you must do is download the
update file from the web of Televes and save it in
your computer.
2.- Turn your H30FLEX on
3.- Press the Home button to go to the Main menu
4.- Select Setup
5.- Select USB Storage
6.- Turn USB Storage ON
7.- Connect your H30FLEX to your computer using
the USB connector
8.- Then find the unit called H30FLEX in you com-
puter and open the folder. You'll see a fold called
updates
Analyzer
Saves the configuration of
your H30FLEX into
selected file
9.- Copy the two files corresponding to the update
(updater and version) to the updates folder in the
H30FLEX unit.
10.- Unmount the H30FLEX unit in your computer
11.- Select the USB Storage feature in the Setup
menu of your H30FLEX to turn it off
12.- Select the Firmware update feature in the
menu of your H30FLEX and press the OK button
to confirm.
13.- Then a messagge will appear indicating that
the H30FLEX is being updated. Wait unt the the
H30FLEX resets automatically
Error Messages
LOW BATTERY
Indicates that the battery is about to finish. The
battery icon is red now. It is recommended to con-
nect the meter to the external power source.
LOW BATTERY
Shutting down
Some time after the LOW BATTERY message
appears (time varies depending on the functions
used), it will appear this message. If the meter is
not connected to the external power source, it will
switch off.
BAD POWER
Unplug power source
This message appears when the meter is con-
nected to an external power source that does
not supply it the right power. Please, use only the
power source provided with the H30FLEX.
SHORT-CIRCUIT
Check installation
This message appears when the meter detects a
short-circuit at the RF input. It is recommended to
check the installation to find out why the short-
circuit is produced.
DC OUTPUT LIMIT EXCEED
Switch DC OUTPUT off
This message appears when the meter detects
22